
How to Check AusNet Outages in Eastern Victoria and Prepare for the Next One
- Do not use this blog for the official AusNet outage status. Use the official AusNet outage tracker instead.
- AusNet is a network operator, not a retailer, so check if it will cover your property.
- Report a fault once on 13 17 99, and stay away from fallen lines.
- Estimates can change. Payments are based on hours accumulated over the year, and a portable battery will only cover a few essentials.
Looking for the latest AusNet outage updates? Check the official outage tracker and enter your address to find out the status. AusNet is not an electricity retailer. It cares for the poles and wires, not your bill!
Estimates are not promises, as status changes while crews investigate. This guide will explain how to check the tracker, how to report faults, and how to plan ahead. A little preparation can make a blackout less stressful.
Go to AusNet Outages and Confirm Your Distributor
The AusNet outages page provides links to the tracker and alert settings. Begin there when the lights go out. There are three simple tests to determine your status.

Make Sure AusNet Supplies Your Address
AusNet serves parts of eastern and north-eastern Victoria, plus parts of Melbourne's north and east. It does not cover the entire state. Other distributors look after the rest.
Do not assume from your suburb/postcode. Use the Victorian Government's find your energy distributor page and your electricity bill to ensure you have the correct property. Your NMI (National Metering Identifier) is listed on your electricity bill. Your retailer will also be able to assist you in locating it.
Use the Tracker to Read Your Status
Open the AusNet outage tracker on your mobile device. Search by address. This is the official AusNet power outage map for live status.
Determine if the entry is planned or unplanned. Often, planned work is preceded by a warning. Faults lead to unplanned events, like storm damage. The word "live" applies to the tracker only, so trust it over any article.
Understand Estimates and Set Up Alerts
A restoration estimate is an educated guess. Crews keep updating it as they inspect damage. It can be delayed by storms, access issues, and repeat faults. Refresh every few hours, not constantly.
SMS and email alerts can be controlled on the notifications page. Your phone and email details are transferred from your electricity retailer to AusNet, so please ensure that your electricity retailer has these details up to date. Alerts save you time and phone battery. All contacts are collected in one place in Table 1.
Table 1. AusNet outage lookup and response guide
Need or channel |
Official contact or URL |
Purpose |
Official tracker |
Verify address and status |
|
Notifications |
Set official SMS/email settings |
|
Electricity faults |
13 17 99, https://www.ausnetservices.com.au/outages/report-a-fault |
Report once; assessment may precede tracker display |
Life-support priority line |
1800 818 832, https://www.ausnetservices.com.au/safety/life-support-customers |
24/7 priority support for registered life-support customers. For immediate danger, call 000. |
Report a Fault or Hazard That Is Not on the Map
At times, your street is dark, but the tracker doesn't show anything. That gap is common early on. Here is what to do next.
No sign of your AusNet power outage on the tracker? Use the fault report page or call 13 17 99. The line is open 24 hours a day, 7 days a week. Report once only.
Online reports may be assessed before they appear on the tracker. Duplicate reports can slow things down. Include your address and what you saw. This number is for electricity faults, not gas.
Assume that fallen lines are live. Keep children and pets at least 8-10 metres away and do not come into contact with them. Do not go near lines or objects in contact with lines, including branches, vehicles, fences or water. Call 13 17 99, or 000 if someone is in immediate danger.
Prepare for Extended Outages in Rural Areas
Eastern and north-eastern Victoria has long rural feeders, tall trees and bushfire risk. Lines can be downed by storms, and repairs can be delayed. Victoria's powerline bushfire safety program includes the rapid earth fault current limiter (REFCL). Please do not assume it caused a current outage.
Plan for Phones, Food and Daily Essentials
AusNet's tips for a power outage include safety, food and staying warm or cool. Charge phones early. Keep fridge and freezer doors closed.
One way to prioritise is shown in Table 3. Modify it for your home.
Table 3. Staged planning for a prolonged outage
Stage |
Priority |
Notes |
First hours |
Communications, lighting, and keeping doors to fridge and freezer closed |
Please consult the official map and restoration information |
Day 1 to 2 |
Charging of critical devices, fridge or freezer |
Schedule recharging and refrain from using stored energy for non-essentials |
Day 3 and beyond |
Food safety decisions, medical and support arrangements |
Follow official guidance; think about moving if necessary |
Set Up Separate Life Support Arrangements
For a person who is using life support equipment, make a separate plan. Contact AusNet or your electricity retailer to register. Priority service is available to registered customers by calling 1800 818 832. AusNet prioritises registered customers for support and updates, but registration does not guarantee uninterrupted supply or a set restoration time.
Create your own emergency plan with your doctor or equipment provider. Discuss backup options and a safe place to move to. Do this before storm season. If there is immediate danger, call 000.
Learn About Guaranteed Service Level Payments
Victoria has guaranteed service level (GSL) payments for some reliability failures. GSL payment rules can initially seem confusing. The supply restoration rules accumulate hours over the course of an entire year.
How Cumulative Hours and Other Categories Work
The AusNet GSL page lists supply restoration payments by cumulative hours. The figures are for unplanned sustained outage hours from 1 July to 30 June. It is not a single, unbroken interruption.
The 18, 30-, and 60-hour thresholds are not three individual single-event thresholds. Hours from multiple interruptions add up. Table 2 was checked recently, so please recheck the official page for the latest update.
There are other conditions for other categories, such as Major Event Day payments. Not all storms are excluded. Payments are not guaranteed.
Separately, AusNet lists a $90 Major Event Day payment for eligible outages lasting more than 12 hours during a Major Event Day. This is a separate GSL category and is not part of the cumulative 18-, 30- and 60-hour supply restoration thresholds. It has its own eligibility conditions.

Table 2. AusNet supply restoration GSL payments (cumulative financial-year measure)
Unplanned sustained outage hours (cumulative) in the financial year 1 July to 30 June |
Supply restoration payment provided by AusNet |
More than 18 hours |
$130 |
More than 30 hours |
$190 |
More than 60 hours |
$380 |
How Eligible Payments Reach Your Electricity Retailer
Applications are not required. Eligible payments are calculated by AusNet. AusNet calculates eligible payments at the end of each quarter and sends them to your electricity retailer within 60 business days after the quarter ends. Your retailer then applies the payment to your bill. Customers consuming 160 MWh or less annually may be eligible. This also includes typical households.
Keep an eye on your bills. If you're not sure, ask your retailer. Requirements may be subject to the official rules at the time.
Plan Backup Power and Recharging for Essentials
A battery can keep certain essentials running during a power outage. It can't prevent a network failure. Portable power stations suit plug-in loads only.
A permanent home battery backup system should be professionally designed and installed by a licensed electrician. Petrol generators should never be used indoors, as carbon monoxide is a deadly gas.
Meet Two Portable Options
There are two portable power stations to fit this task:

-
BLUETTI Elite 200 V2: 2,073.6Wh capacity and 2,600W continuous AC output.
-
BLUETTI Elite 400: 3,840Wh capacity and 2,600W continuous AC output.










BLUETTI Elite 200 V2 Portable Power Station | 2,600W, 2,073.6Wh
1,000W Max Solar Input
15ms UPS Response Time
6,000+ Life Cycles to 80% Capacity
MPPT Controller, BMS, and More
Ideal for Home Backup and Outdoor Adventures








BLUETTI Elite 400 Portable Power Station | 3,840Wh 2,600W
- 3,840 Wh capacity
- Up to 1.3× longer runtime
- 2,600 W rated / 3,900 W Lifting Power
- 0-80% in 70 Min (2,800W)
- Lightest 3.8kWh Power Station(39 kg)
Both can be used for basic items like a router, lights, or a fridge. Neither supplies permanently wired circuits. Please read the current manual to check the ports and supported use before buying.
Match Capacity to Your Daily Needs
Calculate the total daily watt-hours (Wh) of all your essentials. Calculate the energy used by multiplying watts × hours used. These are only examples. So, be sure to check the label on your appliances:
-
Router: 15W × 24 hours = 360Wh
-
Phone and laptop charging: about 100Wh
-
LED lights: 20W × 5 hours = 100Wh
-
Fridge: about 800Wh/day (check the compressor's start-up needs)
This is 1,360Wh/day. Usable energy is assumed to be 85%. This is an estimate and not a measured value. The Elite 200 V2 gives about 1,762Wh (2,073.6 × 0.85). That's almost 1.3 days. The Elite 400 provides 3,264Wh. The figure comes from 3,840 × 0.85. That's close to 2.4 days.

The actual running time depends on device wattage, temperature, usage pattern, battery condition, and efficiency loss. Keep a reserve for longer interruptions. Power points are dead mid-blackout, so recharging requires solar or a vehicle. The Elite 200 V2 supports solar charging but requires a dedicated 20A MC4-XT60 cable.
Quick comparison: illustrative usable energy and runtime
Power station |
Nominal capacity |
Approximate usable energy (85%) |
Example runtime at a combined 50W load |
Elite 200 V2 |
2,073.6Wh |
About 1,762Wh |
About 35 hours |
Elite 400 |
3,840Wh |
About 3,264Wh |
About 65 hours |
These runtime examples use the same illustrative 50W combined load and 85% usable-energy allowance. Actual runtime depends on the connected devices and operating conditions.
Conclusion
Having the right information can make a big difference when coping with a power outage. Check your address and NMI in advance. Report once, keep away from downed lines, and be prepared.
Prepare an outage plan before the next interruption. Choose your backup equipment after working out your daily Wh usage. If another interruption occurs, check the official tracker first.
Frequently Asked Questions
The report needs to be verified by AusNet. This prevents duplicate entries. Report once and watch the tracker.
Shop Products for This Article
You May Also Like













